Home> Industry Information> Analysis of hot stamping failure or false stamping

Analysis of hot stamping failure or false stamping

February 19, 2024

The hot stamping is not good or the hot stamping is not true. This is related to the surface characteristics of the printed parts, the nature of the anodized aluminum, the hot stamping temperature and the pressure and other factors. ① Too much powder is sprayed on the surface of the printing piece or the surface contains additives such as debonding agent and gloss paste, which will hinder the adsorption of the anodized aluminum and the paper. Solution: Surface powder removal treatment or solution in the printing process. ② Improper selection of anodized aluminum directly affects the fastness of bronzing. The type of anodized aluminum used should be comprehensively considered according to the size of the gold foil area and the characteristics of the material to be stamped. The domestic anodized aluminum is mainly the Peacock brand series produced by Shanghai Shenyong Bronzing Material Co., Ltd., and the imported anodized aluminum is mainly the PM and LK series of KURZ in Germany, the A, K, and H series in Japan, and the SP series of KOLON in South Korea. .

The selection of anodized aluminum can mainly refer to the following categories: hot stamping on general products (general ink color), anodized aluminum has 88-1 type, KURZ PM type; cigarette packs, cosmetics and other dark ink color printed matter (including gold and silver) Bronzing anodized aluminum has 88-2 type; anodized aluminum with fine handwriting such as cigarette labels and cosmetic packaging has 88-3, 88-4 type, PM288, etc .; suitable for OPP or PET laminated paper and cardboard with UV ink , Glazing paper and other products hot stamping anodized aluminum have 88-4 type, K series, LK series, and SP series. ⑧ Failure to properly grasp the stamping equipment and the matching between the stamping time and the stamping temperature, which affects the stamping fastness and the clarity of the graphic outline.

Due to the different equipment and materials to be stamped, the stamping time and stamping temperature are different. For example, the high-speed circular rounding machine is fast and the stamping line contacts, and the hot stamping temperature is higher than the circular flattening or flattening. In general, the temperature of round pressing and round hot stamping is 190 ℃ ~ 220 ℃, the round pressing is about 130 ℃ ~ 150 ℃, and the flat pressing is about 100 ℃ ~ 120 ℃. Of course, the pressing time, hot stamping temperature and production efficiency are also largely restricted by the transfer performance of anodized aluminum.

The above is the Analysis of hot stamping failure or false stamping we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> Analysis of hot stamping failure or false stamping

Contact

Send Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send